Craftsman 3130eSC Benutzerhandbuch
Additional Tests
BATTERY/ALTERNATOR MONITOR
132 FixAssist
®
BATTERY/ALTERNATOR MONITOR
The scan tool can perform a check of the vehicle’s battery and alternator
system to ensure the system is operating within acceptable limits. You
can perform a battery check only, or an alternator system (battery and
alternator) check.
system to ensure the system is operating within acceptable limits. You
can perform a battery check only, or an alternator system (battery and
alternator) check.
To perform a battery check ONLY:
1.
With the scan tool on the Code
Retrieval screen, press and release the
M button.
M button.
The Main Menu displays.
2.
Use the UP
and DOWN
buttons,
as necessary, to highlight Battery/
Alternator Monitor, then press the
ENTER
Alternator Monitor, then press the
ENTER
button.
The Battery/Alternator Monitor Menu
displays.
displays.
3.
Use the UP
and DOWN
buttons,
as necessary, to highlight Battery
Monitor, then press the ENTER
Monitor, then press the ENTER
button.
4.
When the battery check is complete, a
results screen displays the current
Battery Voltage, and indicates whether
or not the voltage is within acceptable
limits. The System Status LEDs provide
a PASS/FAIL indication, as follows:
Battery Voltage, and indicates whether
or not the voltage is within acceptable
limits. The System Status LEDs provide
a PASS/FAIL indication, as follows:
Green = PASS
Yellow = Caution/LOW
Red = FAIL
5.
If you wish to perform an alternator check at this time, use the UP
and DOWN
buttons, as necessary, to highlight Yes, then
press the ENTER
button.
If you do not wish to perform an alternator check at this time,
use the UP
use the UP
and DOWN
buttons, as necessary, to
highlight No, then press the ENTER
button.
To return to the Main Menu, press the M button.
To perform a charging system check:
1.
Start the engine.
Battery/Alternator Monitor
Battery Monitor
Alternator Monitor
Alternator Monitor
Select and press
Press
M
for Main Menu