Honeywell FocusPRO® 6000 5-1-1/5-2 Day Programmable Thermostat (TH6220D) Benutzeranleitung

Set Clock/Day/

Schedule

Auto

Wake

Wed

Fan

In Recovery

System

Auxiliary

Heat On

Heat

Setting

Inside

6:30

Replace Battery

MCR29458

Display screen

Low battery

warning

Press the

FAN

button to select:

Auto: Fan runs only

when heating or

cooling system is on.
On: Fan runs
continuously.

Press the

SYSTEM button

to select:

Heat: Heating system control.
Cool: Cooling system control.
Off: All systems off.
Auto: Thermostat

automatically selects heating

or cooling depending on the

indoor temperature.
Em Heat: Emergency &

Auxiliary Heat control.

Compressor is locked out.

(Select models only.)

Function buttons

Press the button beneath

each function to view

or change settings

(functions change

depending on the task)

System Status

Cool On: Cooling system

is on.
Heat On: Heating system

is on.

Temperature setting

Current inside

temperature

Auxiliary heat (Only

for heat pumps with

auxiliary heat)

Press the

SET

button to change:

Clock: Current time.
Day: Current day.
Schedule: Current

thermostat program

schedule.

Program Schedule

You can program four time periods each day, with different settings for weekdays

and weekends. We recommend the pre-set settings (shown in the table below),

since they can reduce your heating/cooling expenses.
Wake - Set to the time you

awaken and the temperature you

want during the morning, until

you leave for the day.
Leave - Set to the time you leave

home and the temperature you

want while you are away (usually

an energy-saving level).
Return - Set to the time you

return home and the temperature

you want during the evening, until

bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight

(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.

Heat

Cool

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)