Honeywell Honeywell Security | Protect What Matters Most Benutzeranleitung
LED- Light Emitting Diode. These are used as indicators of the system conditions on keypads.
NIGHT- Arming mode used specifically for when everyone is in for the “NIGHT”. All perimeter zones
become instant, there is no entry/exit delay, and some interior zones can be active.
become instant, there is no entry/exit delay, and some interior zones can be active.
PERIMETER ZONES- Zones consisting of door and window contacts and glass break detectors which
will detect an intruder before he gains entry into the premises.
will detect an intruder before he gains entry into the premises.
PREALARM SPEECH- When the system is armed, and someone enters the premises through a “delay”
door, the system speaks “ENTRY DETECTED” followed by the word description programmed for that
door. EXAMPLE: “ENTRY DETECTED, FRONT DOOR…ENTRY DETECTED, FRONT DOOR”.
This speech will be heard for the duration of the entrance delay. If the disarm code is not entered within
the programmed amount of time, the BURGLAR ALARM will sound. If an alarm took place while you
were gone, then the system would speak “system showing alert”, followed by the pre-alarm speech.
door, the system speaks “ENTRY DETECTED” followed by the word description programmed for that
door. EXAMPLE: “ENTRY DETECTED, FRONT DOOR…ENTRY DETECTED, FRONT DOOR”.
This speech will be heard for the duration of the entrance delay. If the disarm code is not entered within
the programmed amount of time, the BURGLAR ALARM will sound. If an alarm took place while you
were gone, then the system would speak “system showing alert”, followed by the pre-alarm speech.
PREALARM TONE- If prealarm speech is not programmed, there will be a steady, low volume sound
emitted through the speakers when the entry delay door is opened. This tone will continue until the disarm
code is entered to disarm the system. If the disarmed code is not entered within the programmed time, the
BURGLAR ALARM will sound. A pulsing pre-alarm tone indicates there was activation while you were
gone.
emitted through the speakers when the entry delay door is opened. This tone will continue until the disarm
code is entered to disarm the system. If the disarmed code is not entered within the programmed time, the
BURGLAR ALARM will sound. A pulsing pre-alarm tone indicates there was activation while you were
gone.
ZONE- Any area or point of protection in the security system such as doors, windows, and all other areas
covered by detection devices.
covered by detection devices.
13