Honeywell Honeywell Security | Protect What Matters Most Betriebsanweisung

– 10 –

Functions of the Keypads

NOTE:  The  functions  printed  directly  on  the
keys  indicate  their  primary  purpose;  the
functions  printed  under  some  of  the  keys
(shown  in  brackets  under  the  respective  key),
indicate their alternate or secondary purpose.

DISPLAY WINDOW

Alpha Display Keypads:

2-line, 32-character

Liquid Crystal Display (LCD) keypads that display
protection points, system status, and messages.

Fixed-Word

Display

Keypads:

Display

protection zone ID and system status messages using
pre-designated words in the LCD display area.

[VOICE]

On Voice keypads, enables the RECORD,

VOLUME and PLAY functions.

1 OFF

Disarms burglary portion of the system,

silences alarms and audible trouble indicators, and
clears visual display after problem's correction.

[RECORD]

On Voice keypads, used in conjunction

with the FUNCTION and VOICE keys to record up
to a 2.5-minute message.

2 AWAY

Arms the entire burglary system,

perimeter and interior.

[VOLUME]

On Voice keypads, used in conjunction

with the FUNCTION and desired volume control
keys ↑ [3] or ↓ [6] to adjust the volume of a recorded
message or voice system status.

3 STAY

Arms perimeter portion of burglary

system only. Interior protection is not armed,
allowing movement within premises without causing
an alarm. If pressed twice in succession, arms
system in Night-Stay mode.

[PLAY]

On Voice keypads, used in conjunction with

the FUNCTION and VOICE keys to play the
recorded message.

[ ↑ ]

On Voice keypads, used in conjunction with the

FUNCTION and VOLUME keys to raise the
message and voice system status volume.

4 MAXIMUM Arms the entire burglary system,

perimeter and interior, but without entry delay.
Entering via an entry/exit door will cause an alarm.

5 TEST

Tests the system and alarm sounder if

disarmed. Refer to Testing The System section for
test procedures.

6 BYPASS

Removes individual protection zones from

being monitored by the system.

[ ↓ ]

On Voice keypads, used in conjunction with the

FUNCTION and VOLUME keys to lower the message
and voice system status volume.

7 INSTANT

Arms in manner similar to the STAY

mode, but without the entry delay feature.

8 CODE

Used to assign additional security codes

and attributes for other users of the system.

9 CHIME

Turns CHIME mode on and off. When on, the

opening of windows or doors while the system is disarmed
sounds 3 beeps at the keypad(s).

KEYS 0–9:

Used to enter the security code(s) and to

perform their associated system functions.

∗ READY

Used to display all open protection zones.

[STATUS]:

On Voice keypads, a momentary press of the

STATUS key annunciates the current system status.
Pressing the STATUS key a second time annunciates and
displays system and/or zone faults (if they exist).

# T

his key can be used for "Quick Arming" of

the system without use of a security code (if
programmed).

[FUNCTION]

On Voice keypads, enables the desired

voice or volume function.

FUNCTION KEYS:

Keys A, B, C, D may have been

programmed for a variety of functions, including panic
(emergency) functions. For details, see the Function Keys
section.

ARMED LED INDICATOR:

(RED) Lit when the

system has been armed.

READY LED INDICATOR:

(GREEN) Lit when the

system is ready to be armed (no faults present). While the
system is disarmed, this indicator will go on and off as
protection zones are closed and opened.

MESSAGE LED INDICATOR:

(RED) On Voice

keypads, flashes red when message waiting or lights red
(steady) when in record mode.

MIC:

On voice keypads, microphone for Message Center

recordings.

INTERNAL SPEAKER:

The built-in speaker mimics

the alarm sounder during alarms, and will also "beep"
during certain system functions. The speaker also
provides voice playback for any recorded messages.