HP X131 10-GbE X2 CX4 Transceiver J8440C Benutzerhandbuch

Produktcode

J8440C

Cabling

Maximum distance:
• 15m with CX4 cables
• 300m with optical media converter and multimode fiber cable

Notes

Connector: CX4; Duplex: full
Use CX4 10-GbE cable (0.5-15 m) or HP X130 CX4 Optical Media
Converter (J8439A).
For suggested vendors of CX4 cables, please see the "Cabling" answers on
the "HP 10-GbE Transceivers" FAQs Web page.
Optical Media Converter (OMC) J8439A is not supported on the C version
as the power supply for the OMC was removed in this design.

Services

Refer to the HP website at

www.hp.com/networking/services

for details on

the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.

HP X131 10G X2 SC LRM

HP X131 10G X2 SC LRM
Transceiver

Transceiver

Transceiver (J9144A)

An X2 form-factor
transceiver that supports
the 10-Gigabit LRM
standard, providing 10-
Gigabit connectivity up to
220 m on legacy
multimode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only

Physical characteristics

Dimensions

3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78
cm)

Weight

0.35 lb. (0.16 kg)

Transceiver form factor

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative

Operating relative
humidity

humidity

0% to 95%, noncondensing

Nonoperating/Storage

Nonoperating/Storage
temperature

temperature

-40ºF to 185ºF (-40ºC to 85ºC)

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption

Power consumption
typical

typical

3.2 W

Power consumption

Power consumption
maximum

maximum

4.2 W

Cabling

Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch
cord may be needed in some multimode fiber installations);

Maximum distance:
• 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
• 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
• 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
• 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
• 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length

.5m to 220m

Fiber type

Multi Mode

Notes

Wavelength: 1310nm
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a mode-
conditioning patch cord is not required. Other multimode cables may

QuickSpecs

HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)

Technical Specifications

DA - 12987 EMEA — Version 7 — April 14, 2011

Page 5