Zanussi ZOB35805XK Benutzerhandbuch

Make sure that the appliance is

cool before you touch it. There is

a risk of burns.

Deactivate the appliance before you

remove the heating element. Make

sure that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.
You can remove the heating element to clean

the oven ceiling more easily.
1. Remove the screw which holds the heating

element. For the first time, use a

screwdriver.

2. Carefully pull the heating element down.

3. Clean the oven ceiling with a soft cloth with

warm water and a cleaning agent, and let it

dry.

Install the heating element in the opposite

sequence.
Install the shelf supports.

Make sure that the heating element

is correctly installed and that it does

not fall down.

The oven door has two glass panels. You can

remove the internal glass panel to clean it.

Do not use the appliance without the

internal glass panel.

The direction in which you open the

door depends on your oven model.

You open the door from the right

side in some models and from the

left side in others.

Press the buttons at

the sides of the door

trim (A) on the upper

cover and pull it

upwards to remove it.

Hold the inner glass

B tightly with both

hands and slide it

upwards to remove it

from its initial

position. Make sure

that you tightly hold

glass B to prevent

the glass from falling.

Clean the door with a wet sponge and rub it dry

with a soft cloth. Do not use steel wool, acids or

abrasive cleaning agents because they can

damage the surface.
When the oven door is clean, install the glass

panel in the opposite sequence. The screen-

printing zone must face the inner side of the

door. Make sure that after the installation the

surface of the glass panel frame on the screen-

printing zones is not rough when you touch it.

Make sure that you put the glass panel in the

rubber distance holders.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.