Vitek VT 1475 W Benutzerhandbuch

3

3

Description
1.  Removable blender-attachment
2.  Motor unit
3.  Maximal speed button “II”
4.  On button “I”
5.  Attachments rotation speed control (1—8)
6.  Display
7.  Lid-gear
8.  Chopping knife
9.  Chopper bowl
10. Whisk gear
11. Whisk for beating/mixing liquid products
12. Measuring cup
13. Mounting brackets

SAFETY MEASURES
Before  using  the  unit,  read  these  instructions
carefully.    Keep  these  instructions  for  future
reference.
•  Before using the appliance for the first time

make sure that electricity supply corresponds
to  the  voltage  of  current  specified  on  the
housing.

•  The  blender  set  allows  quick  and  effective

operation,  but  time  of  continuous  operation
should  not  be  more  than  1  minute  while
operation  with  the  blender-attachment  and
the whisk and not more than 20-30 seconds
while chopping products in the mini-chopper.
Make at least a two-minute interval between
operation cycles.  

•  When  using  the  blender  attachment,  cool

down  hot  products,  maximal  temperature  of
products should not exceed 80°С.

•  Do not use the unit outdoors.
•  Use  only  the  attachments  supplied  with  the

unit.

•  Use  the  unit  only  for  the  intended  purposes

as described in the manual.

•  Before using the unit for the first time, wash

all  the  removable  details,  which  will  contact
products, thoroughly.

•  Before using the unit, make sure that all the

details are set properly.

•  Use the unit on the flat stable surface.
•  Products should be put into the chopper bowl

before switching on the unit.

•  Do  not  overfill  the  chopper  bowl  with  prod-

ucts and watch the level of liquids.

•  The  blades  of  the  chopping  knife  are  very

sharp  and  dangerous.  Handle  them  very
carefully!

•  In case of difficulty in rotating of the chopping

knife,  unplug  the  unit  and  carefully  remove
products, which prevent the blades from ro-
tation.

•  Remove  products  and  pour  out  liquids  from

the chopper bowl only after complete stop of
the knife.

•  Do not touch the rotating parts of the unit. Do

not  allow  hair  or  clothes  edges  get  into  the
blades rotating zone.

•  Never leave the operating unit unattended.
•  Always  unplug  the  unit  before  cleaning  or  if

you do not use it.

•  Do not use the unit near hot surfaces (gas or

electric stove, oven).

•  Provide  that  the  power  cord  does  not  touch

sharp objects and hot surfaces.

•  Do not pull the power cord and do not twist

it.

•  Do not touch the plug with wet hands.
•  Do not use the unit if the power cord is dam-

aged.

•  Do not try to repair the unit yourself. If there

are any damages in the unit, apply to the au-
thorized service center.

•  In order to avoid risk of electric shock or fire,

do  not  immerse  the  unit  into  water  or  other
liquids. If the unit fell into water:

-  do not touch water;
-  unplug the unit immediately, only after it you

can take the unit out of water;

-  apply  to  the  authorized  service  center  for

testing and repair of the unit.

•  Do not allow children to use the unit as a toy.
•  Close supervision is necessary when children

or  disabled  persons  are  near  the  operating
unit.

•  This unit is not intended for usage by children

or disabled persons unless they are given all
the  necessary  instructions  on  safety  mea-
sures  and  information  about  danger,  which
can  be  caused  by  improper  usage  of  the
unit.

•  The blender set is intended for household us-

age only.

VT-1475.indd   3

01.12.2011   11:40:22