Bosch TDS-4581 Sensixx B 45 L SilenceComfort 400 Benutzerhandbuch

23

BOSCH

The ironed garment 

turns dark and/or sticks 

to the soleplate. 

• The selected temperature is too 

high and has damaged the 

garment. 

• Select a suitable temperature for the 

material being ironed and clean the 

soleplate with a damp cloth. 

The soleplate turns 

brown. 

• This is a regular consequence of 

usage. 

• Clean the soleplate with a damp cloth. 

The appliance makes a 

pumping sound. 

• Water is being pumped into the 

steam tank. 

• Water tank (1) is not correctly 

inserted in the housing.

• The sound will not stop. 

• This is normal. 

• Adjust the water tank correctly.

• If the sound will not stop, do not use the 

steam generator and contact an 

authorised technical service centre. 

Loss of pressure during 

ironing. 

• Steam release button activated 

during a long period of time. 

• Use the steam release button at intervals. 

This improves the ironing result as the 

textiles will be dry and stay smooth better. 

Water spots appear on 

the garment during 

ironing. 

• May be caused by steam 

condensed on the ironing board. 

• Wipe the textile cover of the ironing 

board, and iron the spots without steam to 

dry them. 

Water spots appear on 

the garment during use 

of the “PulseSteam” 

function. 

• Water spots are caused by steam 

condensation in the hose when 

cooling down after use. 

• Water drops stop coming out of the 

soleplate after using the “PulseSteam” 

function for some time. 

The hose gets hot 

during use. 

• This is normal.It is caused by the 

steam passing through the hose 

during steam ironing. 

• Place the hose on the opposite side so 

that you cannot touch the hose during 

ironing. 

Water leakage from the 

boiler. 

• Filter (12) located at the side of the 

appliance is loose. 

• Tighten up the filter.

The iron does not stop 

steaming after placing it 

on the pad (2). 

• “PulseSteam” function activated by 

double click. 

• Just press the trigger once again and the 

iron will stop steaming at once. 

If the above does not solve the problem, get in touch with the authorised technical service.