Neff D 39 E 49 S0 Benutzerhandbuch

12

These instructions apply to several appliance variants. It is 

possible that individual features are described which do not 

apply to your appliance.

Note: Switch on the extractor hood when you start cooking and 

switch it off again several minutes after you have finished 

cooking. This is the most effective way of removing the kitchen 

fumes.

Note: Always adjust the fan strength to meet current conditions. 

If there is a large build-up of steam or fumes, select a high fan 

setting.
Switching on
Press button 1, 2 or 3.
To confirm the setting, the 0 button and the set fan speed light 

up.
Switching off the appliance
Press the 0 button.

The fan run-on is possible in any fan speed.

1. First, press the button for the required fan speed 1, 2 or 3.
2. To activate the fan run-on, press and hold the 

%

 button for 

2 seconds.
To confirm the setting, the 0 button and the set fan speed 

flash.

3. To end the fan run-on early, press the 0 button.

■

The run-on time for all fan speeds is 30 minutes. Once this 

time has elapsed, the ventilation and lighting automatically 

switch off.

■

The fan speed can be changed during the run-on time.

You can use the intensive setting if there is a large build-up of 

odours and fumes/vapours.

1. To activate the intensive setting, press and hold the 

g

 button 

for 2 seconds.
To confirm the setting, the 0 button lights up and the 

g

 button 

flashes.

2. To end the intensive setting early, press the 0 button.

Note: The time of the intensive setting is 6 minutes. Once this 

time has elapsed, the appliance switches back to the fan 

setting that was previously set.

The lighting can be switched on and off independently of the 

ventilation.
Press the 

@

 button.

Setting the brightness
When switching on the lights, press and hold the 

@

 button for 

2 seconds. The brightness is reduced.

Note: When switching on the lights again, the brightness is set 

to maximum once again.

: 

The appliance becomes hot during operation. Allow the 
appliance to cool down before cleaning.

: 

Penetrating moisture may result in an electric shock. Clean the 
appliance using a damp cloth only. Before cleaning, pull out the 
mains plug or switch off the circuit breaker in the fuse box.

: 

Do not use any high-pressure cleaners or steam cleaners, 
which can result in an electric shock.

: 

Components inside the appliance may have sharp edges. Wear 
protective gloves.

Observe the information in the table to ensure that the different 

surfaces are not damaged by using the wrong type of cleaning 

agent. Do not use

■

harsh or abrasive cleaning agents,

■

cleaning agents with a high concentration of alcohol,

■

hard scouring pads or sponges,

■

high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning 

agents.

Explanation
0

Fan off

1

Fan speed 1

2

Fan speed 2

%

Fan run-on

3

Fan speed 3

g

Intensive setting

B

Light on/off