Cisco Cisco IGX 8400 Modules Fehlerbehebungsanleitung

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Frames Discarded "From Port, to Network" at Originating End
 Frames Discarded "From Network, to Port" at Destination End
 Related Information

The dspchstats command displays of a set of statistics for a channel. These statistics indicate the number of
frames successfully routed over the network and the number discarded on a specific connection (PVC).

This is the syntax of this command:

dspchstats \<channel> [interval]

where:

<channel> is the channel for which statistics are to be displayed, and [interval] (optional) specifies in
seconds the interval between updates of the display.

This document is intended to help determine the causes of frame discards.

There are no specific requirements for this document.

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.