Cisco Cisco NSS326 6-Bay Smart Storage
4
Release Notes for Cisco Smart Storage Optware PKG Package Version 0.99.163
Release Notes
Within 15 seconds, a MD5 checksum result window will display to confirm the
integrity of the system. After the successful integrity check of the NAS, click OK
for the new firmware file to upload to the NAS. After this has completed, a
message displays and asks you to reboot the system. Please wait patiently. A
system log in window will automatically display after the successful update to the
new firmware.
integrity of the system. After the successful integrity check of the NAS, click OK
for the new firmware file to upload to the NAS. After this has completed, a
message displays and asks you to reboot the system. Please wait patiently. A
system log in window will automatically display after the successful update to the
new firmware.
The MD5 verification window does not perform any processing on the NAS or the
candidate firmware for installation. Once the target firmware has been selected,
the MD5 verification allows the user to validate the checksum calculated by the
NAS against the provided checksum value found in a separate file that was
provided alongside the firmware download. Mismatched checksums indicate
firmware integrity has been compromised.
candidate firmware for installation. Once the target firmware has been selected,
the MD5 verification allows the user to validate the checksum calculated by the
NAS against the provided checksum value found in a separate file that was
provided alongside the firmware download. Mismatched checksums indicate
firmware integrity has been compromised.
PKG Package Installation
From the Applications > PKG Plugins window, you can install PKG packages to
add more functions to the NAS. Before you install the packages, make sure the
files are correct, read the instructions carefully, and back up all important data on
the NAS. Download the software package that you want to install on NAS to your
computer.
add more functions to the NAS. Before you install the packages, make sure the
files are correct, read the instructions carefully, and back up all important data on
the NAS. Download the software package that you want to install on NAS to your
computer.
To install a new PKG package:
STEP 1
Choose Applications > PKG Plugins > Installation from the Navigation menu. The
PKG Plugins INSTALLATION window appears.
PKG Plugins INSTALLATION window appears.
STEP 2
Click Browse to locate and select the Optware_0.99.163_x86.pkg file.
STEP 3
Click Install. The Optware PKG Plugin is installed to the NAS.
NOTE
To verify the PKG is installed, choose Applications > PKG Plugins > PKG Installed.
A graphical icon appears in the window, indicating that the PKG is installed on the
NAS system.
A graphical icon appears in the window, indicating that the PKG is installed on the
NAS system.
NOTE
Before using the ipkg utility, Optware must be enabled from the NAS interface. If
there is an existing SSH session open when Optware is enabled, the ipkg utility will
not be available in this same session. You need to open a new SSH session to use
there is an existing SSH session open when Optware is enabled, the ipkg utility will
not be available in this same session. You need to open a new SSH session to use