Cisco Cisco NSS030 Smart Storage External Power Adapter Wartungshandbuch

Disk Management

Cisco Small Business NSS300 Series Smart Storage Administration Guide

120

 

To add a hard drive:

For RAID 10, adding hard drive(s) requires adding one pair of hard drives into the 
RAID 10 volume at one time.

Choose Disk Management > RAID Management from the Navigation menu. The 
RAID Management window opens.

Select the hard drive to add to the RAID configuration.

Click Add Hard Drive.

Select the hard drive to add to the RAID and click Add Hard Drive. All data on the 
selected drive will be deleted during this process. Click OK to confirm. The NAS 
will beep twice.

This process may take as little as a few hours or more than 24 hours to complete 
depending on the number and size of the drives being replaced. Please wait 
patiently for the process to finish. Do not turn off power to the NAS during this 
process.

After drive expansion, the number of drives in the configuration and the total 
capacity will reflect the changes implemented. You can use the larger capacity.

To migrate a disk configuration to a higher RAID level:

The RAID 0 and RAID 1 can be migrated to RAID 10.

Prepare a hard drive of the same format and same capacity (or larger) as an 
existing drive in the RAID configuration. The drive configuration status must be 
“Ready.”

Choose Disk Management > RAID Management from the Navigation menu. The 
RAID Management window opens.

Select an available drive and click Migrate.

Select one or more available drives. The drive capacity after migration is 
displayed. Click Migrate.