Cisco Cisco UCS B440 M1 High-Performance Blade Server Installationsanleitung
8
Cisco UCS B420 M3 Server Upgrade Guide for Intel E5-4600 v2 Series CPUs
OL-28629-01
Cisco UCS Blade Server
Use the GUI or CLI procedures in the
Sample Board Controller Activation Command Sequence
The following is an example of the commands with sample values.
Box-A# scope server 1/4
Box-A /chassis/server # scope boardcontroller
Box-A /chassis/server/boardcontroller # show image
Name Type Version
--------------------------------------------- -------------------- -------
ucs-b420-m3-brdprog.3.0.gbin Board Controller 3.0
ucs-b420-m3-brdprog.8.0.gbin Board Controller 8.0
Box-A /chassis/server/boardcontroller # activate firmware 8.0 force
Warning: When committed this command will reset the end-point
Box-A /chassis/server/boardcontroller* # commit-buffer
Note
The server automatically reboots after the
commit-buffer
command is executed.
Box-A /chassis/server/boardcontroller # show version
BoardController:
Running-Vers: 8.0
Package-Vers:
Activate-Status: Activating
Box-A /chassis/server/boardcontroller # show version
BoardController:
Running-Vers: 8.0
Package-Vers:
Activate-Status: Ready
Note
When the
show version
command returns
Activate-Status: Activating
, the process is working, but
incomplete. When the command returns
Activate-Status: Ready
, the process is complete. The process
takes a few minutes.