Cisco Cisco Packet Data Gateway (PDG)

 

 

 

alcap service 

The name of the ALCAP service of which statistics are displayed. 

service id 

The identity number of the ALCAP service of which statistics are displayed. 

Context 

Indicates the system context name in which ALCAP service is configured. 

state 

Indicates the state of the ALCAP service. 

self point code 

Indicates the address of this ALCAP service in SS7 point code notation. 

ss7 routing domain id 

Indicates the routing domain id in which ALCAP service is associated. 

AAL2 Nodes 

This group displays the information related to AAL2 node configured in ALCAP service. 

Node name 

Indicates the name of the AAL2 node configured in ALCAP service. 

Point Code 

Indicates the address of AAL2 node in SS7 point code notation. 

Path id 

Indicates the identity number of AAL2 path configured on this AAL2 node under ALCAP service. 

Routes 

This group displays the information related to AAL2 routes configured for AAL2 path. 

AESA 

Specifies the ATM Endpoint Service Address (AESA) in an ATM (or AAL2) network to map with 
adjacent AAL2 node. The AESA is based on the generic network service access point (NSAP) format. 
The ATM connection from HNB-GW terminates at this point. 

Node id 

Indicates the AAL2 node identity number used for routes in AAL2 path FSM. 

ERQ timer 

Indicates the maximum time, in seconds, configured for Timer_ERQ on the system to wait for 
response from adjacent AAL2 node before reporting the failure of AAL2 Establish Request procedure. 
Configurable range is from 5 through 30 seconds and default is 5 seconds. 

REL timer 

Indicates the maximum time, in seconds, configured for Timer_REL on the system to waits for 
response from adjacent AAL2 node before reporting the failure of AAL2 Release Request procedure. 
Configurable range is from 2 through 60 seconds and default is 2 seconds. 

RES timer 

Indicates the maximum time, in seconds, configured for Timer_RES on the system to waits for 
response from adjacent AAL2 node before reporting the failure of AAL2 Reset Request procedure. 
Configurable range is from 2 through 60 seconds and default is 2 seconds. 

BLO timer 

Indicates the maximum time, in seconds, configured for Timer_BLO on the system to waits for 
response from adjacent AAL2 node before reporting the failure of AAL2 Path Block procedure. 
Configurable range is from 2 through 60 seconds and default is 2 seconds. 

UBL timer 

Indicates the maximum time, in seconds, configured for Timer_UBL on the system to waits for 
response from adjacent AAL2 node before reporting the failure of AAL2 Path Un-Block procedure. 
Configurable range is from 2 through 60 seconds and default is 2 seconds. 

MOD timer 

Indicates the maximum time, in seconds, configured for Timer_MOD on the system to waits for 
response from adjacent AAL2 node before reporting the failure of AAL2 Path ModifyRequest 
procedure. Configurable range is from 5 through 30 seconds and default is 5 seconds.