Cisco Cisco Wireless Services Module 2 (WiSM2)
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco Wireless Controllers
and Lightweight Access Points for Cisco
Wireless Release 8.1.102.0
and Lightweight Access Points for Cisco
Wireless Release 8.1.102.0
First Published: May 8, 2015
This release notes document describes what is new in Cisco Wireless Release 8.1.102.0, instructions to
upgrade to this release, and open and resolved caveats for this release. Unless otherwise noted, in this
document, all Cisco Wireless Controllers are referred to as Cisco WLCs, and all Cisco lightweight access
points are referred to as access points or Cisco APs.
upgrade to this release, and open and resolved caveats for this release. Unless otherwise noted, in this
document, all Cisco Wireless Controllers are referred to as Cisco WLCs, and all Cisco lightweight access
points are referred to as access points or Cisco APs.
Revision History
Table 1
Revision History
Modification Date
Modification Details
September 14,
2016
2016
•
–
Added: Cisco Flex 7510 WLC support for TrustSec (Security Group Tag
Exchange Protocol (SXP) feature.
Exchange Protocol (SXP) feature.
•
–
Removed: TrustSec SXP from features not supported on Cisco Flex 7510
WLCs section.
WLCs section.
August 17, 2016
•
–
Added this statement: If you downgrade from Release 8.3 to Release 8.1,
the Cisco Aironet 1850 Series AP, whose mode prior to the downgrade
was Sensor is shown to be in unknown mode after the downgrade. This is
because the Sensor mode is not supported in Release 8.1.
the Cisco Aironet 1850 Series AP, whose mode prior to the downgrade
was Sensor is shown to be in unknown mode after the downgrade. This is
because the Sensor mode is not supported in Release 8.1.