Cisco Cisco VC220 Dome Network Camera Wartungshandbuch
Connecting the Cisco VC 220 Camera
Verifying the Hardware Installation
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
25
3
STEP 3
Connect the PoE power injector to power.
Verifying the Hardware Installation
After you install the Cisco VC 220 camera, check the Status LED to verify
connectivity. See
connectivity. See
.
NOTE
It is suggested that you install the software (see
) before you replace the dome cover on the
camera. After the software is installed, you will be able to use the web-based
configuration utility to see how the lens should be adjusted and how the camera
needs to be focused. See
configuration utility to see how the lens should be adjusted and how the camera
needs to be focused. See
for instructions on lens and focusing adjustments, and how to replace the dome
cover.
cover.
PoE Power Injector
(optional)
Non PoE Switch