Cisco Cisco DX70 Designanleitung
Cisco DX Series Wireless LAN Deployment Guide
76
For the Cisco Autonomous Access Point, ensure that the SSID is configured for open + eap as and network-eap when using
802.1x authentication.
802.1x authentication.
dot11 ssid voice
vlan 21
authentication
open eap
eap_methods
authentication
network-eap
eap_methods
authentication key-management wpa cckm
admit-traffic
If the Cisco Autonomous Access Point is registered to a WDS (Wireless Domain Services) server, ensure both types of
authentication are enabled in the WDS configuration.
wlccp authentication-server infrastructure method_Infrastructure
wlccp authentication-server client mac method_Clients
wlccp authentication-server client
wlccp authentication-server client mac method_Clients
wlccp authentication-server client
eap
method_Clients
wlccp authentication-server client
leap
method_Clients
wlccp wds priority 255 interface BVI1
Controller Settings
Ensure the Cisco Unified Wireless LAN Controller hostname is configured correctly.
Enable Link Aggregation (LAG) if utilizing multiple ports on the Cisco Unified Wireless LAN Controller.
Configure the desired AP multicast mode.
Enable Link Aggregation (LAG) if utilizing multiple ports on the Cisco Unified Wireless LAN Controller.
Configure the desired AP multicast mode.