Cisco Cisco 2600 3600 3700 Series 36-Port 10 100 EtherSwitch Modules Fehlerbehebungsanleitung
2-36
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-002
Chapter 2 Message and Recovery Procedures
PM Messages
Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],
associated mapped vlan id value [dec].
associated mapped vlan id value [dec].
Explanation
This message means that the switch failed to unlock a VLAN ID. The most likely cause
is that the VLAN is already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the
MVID.
MVID.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
.
PM Messages
This section contains the port manager messages. The port manager is a state machine that controls all
the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port
manager to provide switch functions.
the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port
manager to provide switch functions.
Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes.
bytes.
Explanation
This message means that the available memory for the switch processor is low. This can
occur when too many Layer 2 VLANs are configured. [dec] is the available memory.
Recommended Action
Remove features from the system to reduce memory usage.
Error Message PM-2-NOMEM: Not enough memory available for [chars].
Explanation
This message means that the port manager subsystem could not obtain the memory it
needed to initialize the specified operation. [chars] is the port manager operation.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the
.