Cisco Cisco C880 M4 Server
CHAPTER 1 Network Environment Setup and Tool Installation
1.4 Maintenance LAN
1.4 Maintenance LAN
6
C122-E175-01EN
1.4
Maintenance LAN
The MMB provides the following LAN ports for maintenance purposes.
TABLE 1.5 Maintenance LAN
Port
Description
Remarks
CE LAN
CE terminal port for use in maintenance work
100Base-TX, RJ45
REMCS LAN
This port is not used.
100Base-TX, RJ45
FIGURE 1.2 Maintenance LAN of the MMB
The maintenance LAN is configured with Web-UI or CLI of the MMB. The subnet of the maintenance LAN
must be separated from the other subnets such as one for the management LAN, the production LAN, etc.
Remarks
Maintenance IP can pass beyond only one gateway with specified address.
must be separated from the other subnets such as one for the management LAN, the production LAN, etc.
Remarks
Maintenance IP can pass beyond only one gateway with specified address.
1.5
Production LAN
This section describes the configuration of the production LAN for the Cisco C880 server.
1.5.1 Overview of the production LAN
The IOU includes LAN ports for the production LAN.
You can mount additional LAN cards in the PCI Express slots on the IOU as needed, to use their ports for the
production LAN.
You can mount additional LAN cards in the PCI Express slots on the IOU as needed, to use their ports for the
production LAN.
1.6
Management Tool Operating Conditions and Use
This section describes the operating conditions and use of the management tools.
1.6.1 MMB
The MMB Web-UI operating conditions are as follows.