Cisco Cisco Catalyst 6500 Series Wireless LAN Services Module (WLSM) Fehlerbehebungsanleitung

Issue the transfer download serverip 'TFTP_server_IP_address' command in order to
define the TFTP server IP address.

c. 

Issue the transfer download path 'TFTP_server_path' command in order to define the path
of the TFTP default directory where the config file needs to be uploaded.

d. 

Issue the transfer download filename<filename> command in order to specify the filename.

e. 

Issue the transfer download start command to upload the file.

f. 

The same can be done from WebUI.

Once the configuration file is downloaded to the controller, the controller will reset and boot.

g. 

Issue the show invalid−config command on the controller. It should show any invalid configurations.

Note: You might see invalid commands related to the AP−manager that shows up. This is expected
because WiSM−2 2 does not have a separate AP−manager.

4. 

Check the APs joining and if clients can pass traffic.

5. 

CAT6504−MA#sh run

Building configuration...

Current configuration : 4804 bytes

!

! Last configuration change at 20:34:02 UTC Tue Apr 12 2011

!

version 12.2

service timestamps debug uptime

service timestamps log uptime

no service password−encryption

service counters max age 10

!

hostname CAT6504−MA

!