Cisco Cisco UCS B440 M1 High-Performance Blade Server Weißbuch
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 56 of 83
16.
WhenOEL installation completes, you can restart which would boot the OEL5.5from
SAN.
SAN.
4.5 WebLogic11gR1 installation
Whenthe OEL5.5 boot from SAN is completed, start the installation of Oracle WebLogic Server. The WebLogic
Server installation is as follows:
• Configuration of WebLogic install LUN on CX4
• JRockit 64 bit installation
• Oracle WebLogic Server base install
• Cluster Configuration
4.5.1 Configuration of WebLogic Install LUN on CX4
In the this setup, you have configured vhba0&vhba1 with Storage Group of CX4 having SAN Boot LUN and vhba2
and vhba3 with Storage Group of CX4 having WebLogic install LUN.
The procedure to configure the same, is detailed in the subsequent table:
Tasks #
Task Description
1.
WWPN of vhba2 and vhba3 are zoned in clustered Nexus 5010
For N5K1
For N5K1
rk3-N5k-1# sh zoneset active vsan 8
zoneset name WebLogic1 vsan 8
zone name b230-WebLogic1-vhba0 vsan 8
OS install
* fcid 0x9b02ef [pwwn 50:06:01:63:3c:e0:1b:2b]
* fcid 0x9b01ef [pwwn 50:06:01:68:3c:e0:1b:2b]
* fcid 0x9b0005 [pwwn 20:00:00:25:b5:aa:01:0e]
zone name b230-WebLogic1-data-vhba2 vsan 8
WebLogic Install
* fcid 0x9b0006 [pwwn 20:00:00:25:b5:aa:01:0f]
* fcid 0x9b02ef [pwwn 50:06:01:63:3c:e0:1b:2b]
* fcid 0x9b01ef [pwwn 50:06:01:68:3c:e0:1b:2b]
For N5K2
rk3-N5K-2# sh zoneset active vsan 8
zoneset name WebLogic1 vsan 8
zone name b230-WebLogic1-vhba1 vsan 8
OS install
* fcid 0x4401ef [pwwn 50:06:01:60:3c:e0:1b:2b]
* fcid 0x4402ef [pwwn 50:06:01:6b:3c:e0:1b:2b]
* fcid 0x440003 [pwwn 20:00:00:25:b5:aa:02:0e]
zone name b230-WebLogic1-data-vhba3 vsan 8
WebLogic Install
* fcid 0x440004 [pwwn 20:00:00:25:b5:aa:02:0f]
* fcid 0x4402ef [pwwn 50:06:01:6b:3c:e0:1b:2b]
* fcid 0x4401ef [pwwn 50:06:01:60:3c:e0:1b:2b]