Cisco Cisco Prime Infrastructure 3.0 Weißbuch

 

 

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 36 of 83 

 

At times you will encounter a few devices that don’t have the SNMP strings or the CLI access that you thought they 

would have. You can either streamline or change the information on the devices, or if you have another set of 

credentials for a different subnet, you could add that to the CLI section of the discovery profile and rerun the 

discovery. If you have a handful of changes, you can click the devices with a status of Managed with Warning and 

then click the Edit button to modify the credentials. 

 

With Cisco Prime Infrastructure 2.0, there is now an ability to export devices with credentials directly from the GUI. 

Navigate to Operate > Device Work Center 

and you should be able to see the “Export Device” button as shown in 

following figure: 

 

At that point in time, you can export the device credentials, change them using a spreadsheet application, and 

import them back. 

 TIP: If you need to change the credentials for devices in bulk, this method can be used to do that.