Cisco Cisco Prime Infrastructure 3.0 Weißbuch
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 54 of 63
Wired Remediation
The following tools within Cisco Prime Infrastructure can be used to remediate wired issues:
●
Wired Client Troubleshooting
●
Ad Hoc and Automated Packet Capture
●
Device Work Center
●
Contextual device 360-degree views for easy access to assorted tools:
◦
Ping
◦
TraceRoute
◦
Cisco Discovery Protocol Neighbors
◦
Config Diffs
◦
Inventory Details
◦
Network Audits
◦
Support Forums
Figure 75. Device 360 Views
Trigger Packet Capture from Cisco Prime Infrastructure
Cisco Prime Infrastructure provides a very flexible solution for capturing packets throughout your network. You can
either manually trigger a packet capture or automatically specify the capture based on some advanced parameters,
so that it will be triggered once a threshold level is breached. In both of these solutions, packets can be captured
locally on the NAM or they can be stitched from multiple NAMs and stored in Cisco Prime Infrastructure. Packet
captures can also be triggered on the ASR 1Ks.
Manual Packet Capture from Cisco Prime Infrastructure
In order to do an ad hoc packet capture, you can navigate to
Monitor > Tools > Packet Capture> Capture
Sessions. In order to create a new profile, click
Create and fill in all the criteria for capturing a particular traffic. If
you need to capture a particular type of traffic all the time, it may be a good idea to proactively create those profiles
and test them before automating them, as described in the next section.