Cisco Cisco HDT Network Storage Hard Drive Trays Ratgeber Für Administratoren
Configuring your Storage
Adding a Disk Drive to an Array
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
45
4
STEP 2
The available disks appear in the New RAID Device table. Select each disk that
you want to include in the array.
you want to include in the array.
STEP 3
From the RAID Level drop-down menu, click the RAID level of the RAID array you
want to create.
want to create.
STEP 4
Click Add.
STEP 5
The RAID creation can take some time to complete (depending on the size of the
disks and the selected RAID level). You can monitor the progress of the RAID build
from the Storage Status page. When the build is finished, the array appears in the
RAID Arrays table. The disks used in the array are no longer available for creating
additional arrays.
disks and the selected RAID level). You can monitor the progress of the RAID build
from the Storage Status page. When the build is finished, the array appears in the
RAID Arrays table. The disks used in the array are no longer available for creating
additional arrays.
Adding a Disk Drive to an Array
You can add additional disks to an existing RAID1 or RAID5. As long as the array is
clean, these disks then become spares.
clean, these disks then become spares.