Cisco Cisco Catalyst 6500 Series Intrusion Detection System (IDSM-1) Module Technisches Handbuch
Upgrading the Intrusion Detection System Module
Document ID: 23080
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Upgrading the IDSM Application Partition
Step−by−Step Instructions
Verifying the Application Partition Upgrade
Upgrading the IDSM Service Pack
Verifying the Service Pack Upgrade
Upgrading the IDSM Signatures
Verifying the Signature Upgrade
Upgrading the IDSM2
Upgrading the Maintenence Partition
Reimaging the Application Partition from the Maintenence Partition
Minor Image Upgrade
Upgrading the IDSM2 Service Pack or Signatures
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Upgrading the IDSM Application Partition
Step−by−Step Instructions
Verifying the Application Partition Upgrade
Upgrading the IDSM Service Pack
Verifying the Service Pack Upgrade
Upgrading the IDSM Signatures
Verifying the Signature Upgrade
Upgrading the IDSM2
Upgrading the Maintenence Partition
Reimaging the Application Partition from the Maintenence Partition
Minor Image Upgrade
Upgrading the IDSM2 Service Pack or Signatures
Troubleshoot
Related Information
Introduction
This document explains how to perform a Cisco Intrusion Detection System Module (IDSM) upgrade on an
application partition, service pack, and a signature update. For more details on upgrading the IDS Sensor,
refer to Catalyst 6000 Intrusion Detection System Module.
application partition, service pack, and a signature update. For more details on upgrading the IDS Sensor,
refer to Catalyst 6000 Intrusion Detection System Module.
Prerequisites
Requirements
Before attempting this configuration, please ensure that you meet the following prerequisites:
Start with an IDS Sensor that is up and still communicating with the Director until the time of the
upgrade.
upgrade.
•
You should be able to successfully use ping, passive FTP, and Telnet to get to the Sensor without
interference from any sort of firewall or packet−filtering device before the upgrade.
interference from any sort of firewall or packet−filtering device before the upgrade.
•
Make sure you have an FTP server that supports passive mode.
•
Components Used
The information in this document is based on the software and hardware versions:
IDSM Sensor Model WS−X6381−IDS running software version 2.5.
•
IDS Director running Solaris version 2.6, HP OpenView version x5.01, IDS Director Software
version 2.2.3 S9.
version 2.2.3 S9.
•
Solaris version 2.8 workstation with passive FTP and Telnet access to the Sensor and the Director.
•