Cisco Cisco Content Switching Module Technisches Handbuch

Introduction
 Before You Begin
      Conventions
      Prerequisites
      Components Used
 Operation Mode
 Network Diagram
 Configurations
 show Commands
      show ip slb status Command
      show ip slb vserver Command
      show ip slb reals Command
      show ip slb serverfarms Command
      show ip slb vlan Command
 Troubleshoot
 Related Information

The Content Switching Module (CSM) provides high−performance connections between network users and
server farms based on Layer 4 through 7 information. You can represent a group of real servers (the server
farm) as a single server instance (virtual server), balance the traffic to the server farm by selecting one of the
server load balancing methods, and limit traffic to individual servers (sticky connections) and server farms
(policies). This sample configuration describes how to configure Server Load Balancing (SLB) on the
Catalyst 6000 family CSM.

You cannot run Cisco IOS

®

 SLB software on the same switch as the CSM. You must configure the CSM

mode by issuing the ip slb mode [csm | rp] command before any configuration. In the ip slb mode command,
the rp argument is default.

For more information on document conventions, see the Cisco Technical Tips Conventions.

There are no specific prerequisites for this document.

The information in this document is based on the software and hardware versions below.