Cisco Cisco MeetingPlace Gateway SIM Anleitung Für Quick Setup

 in the 

 module.

If you plan to use a reverse connection, then confirm the following configurations:

Outbound connections to port 5003 on the Web Server are not blocked, for example, by a 
firewall. 

The Application Server name configured on the Web Server exactly matches the hostname that 
is displayed by entering the 

 command on the Application Server.

After you add or enable a Web Server entry, the link to that Web Server does not appear until you 
log out and log back in to the Administration Center.

You cannot delete Web Server entries. You can, however, disable them.

Log in to the Administration Center.

Select System Configuration > Web Servers.

Select the 

 of the Web Server.

If the unit number was unassigned on the Web Server, then select an unused or obsolete 

Enter or confirm the 

 and 

 of the Web Server.

To enable reverse connection, enter the 

 of the Web Server.

 to Yes.

Select Save.

Repeat this task for each Web Server in the site.

 module 

Use this procedure if you need to:

Disable the Gateway SIM connection between the Application Server and a Web Server.

Hide the link to the Web Server from the Administration Center. 

After you disable a Web Server entry, the link to that Web Server does not disappear until you log 
out and log back in to the Administration Center.

You cannot delete Web Server entries. You can only disable or edit them.