Cisco Cisco MeetingPlace Gateway SIM Anleitung Für Quick Setup

 in the 

 module 

Use this page to display the 

 and clear alarms. To find this page, select Services > Alarms.

Can receive notifications

Whether to send e-mail notifications to the 

 in this VTP.

Recommendations: Avoid changing this setting once Cisco Unified MeetingPlace is in use, 
because users might expect and rely on the current e-mail notification behavior.

Default: Group default (Yes)

Receive attachments

Whether to include attachments in e-mail notifications sent to the 

 in this VTP.

Default: Group default (No)

1.

The required format for phone numbers is determined by the call-control device for your IP telephony network. Therefore, enter phone numbers in the 
same format used to dial similar numbers from a phone on the same IP telephony network as Cisco Unified MeetingPlace. For example, if calls within 
your company are made by dialing the last four digits of a phone number, then enter only the last four digits in Cisco Unified MeetingPlace for internal 
phone numbers. If, however, you want Cisco Unified MeetingPlace to call a phone in a different area code, then you may need to include a 9 and the 
complete telephone number including the area code.

2.

VTP = video terminal profile

Severity

Magnitude of the alarm. Can be major or minor.

Code

Exception code.

Count

Number of alarms that were combined into the one table entry.

First Time

When the alarm was first added to the 

, not including any alarms that were previously 

cleared.

Last Time

When the most recent alarm occurred for this table entry.

Unit

Unit number reporting the alarm. 

This is always 0 for alarms generated within the Application Server. 

For alarms that are reported through the Cisco Unified MeetingPlace Gateway System Integrity 
Manager (Gateway SIM), this is the unit number used by Gateway SIM to identify the device.

Software Module

Number that identifies a specific software module.