Cisco Cisco Unified MeetingPlace for Microsoft Office Communicator Anleitung Für Quick Setup
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Video Conferencing with H.323 Endpoints
16
Procedure
Step 1
On the Cisco router, enter privileged EXEC mode or any other security level set by a system
administrator. Enter your password if prompted.
administrator. Enter your password if prompted.
Router# enable
Step 2
Enter global configuration mode.
Router# configure terminal
Step 3
Enter gatekeeper configuration mode.
Router# gatekeeper
Step 4
Define the zone controlled by the gatekeeper. Specify which gatekeeper interface to use for Registration,
Admission, and Status (RAS) signaling. Force all intra-zone calls, in addition to calls that enter and leave
the zone, to use this gatekeeper.
Admission, and Status (RAS) signaling. Force all intra-zone calls, in addition to calls that enter and leave
the zone, to use this gatekeeper.
Router(config-gk)# zone local gk-zone-name domain-name ras-IP-address invia gk-zone-name
outvia
gk-zone-name enable-intrazone
Step 5
Define a technology prefix that matches what you configure for the H.323 endpoints in Cisco Unified
Communications Manager. The default-technology option specifies to use gateways registering with
this prefix option as the default for routing any addresses that are otherwise unresolved.
Communications Manager. The default-technology option specifies to use gateways registering with
this prefix option as the default for routing any addresses that are otherwise unresolved.
Router(config-gk)# gw-type-prefix type-prefix default-technology
Step 6
Disable proxy communications with local terminals for calls between local and remote zones.
Router(config-gk)# no use-proxy local-zone-name default inbound-to terminal
Router(config-gk)# no use-proxy local-zone-name default outbound-from terminal
Step 7
Enable the gatekeeper.
Router(config-gk)# no shutdown
Example
!
gatekeeper
zone local MP-Zone1 example.net 192.168.2.50 invia MP-Zone1 outvia MP-Zone1
enable-intrazone
gw-type-prefix 1#* default-technology
no use-proxy MP-Zone1 default inbound-to terminal
no use-proxy MP-Zone1 default outbound-from terminal
no shutdown
!
What To Do Next
Proceed to the
.