Fujifilm Color+ BP Produktdatenblatt
2155/
U
13
The information and recommendations contained in this Product Information sheet, as well as technical advice otherwise given by representatives of Fujifilm Speciality Ink Systems
Limited and its associated companies, whether verbally or in writing, are based on our present knowledge and believed to be accurate. However, no guarantee regarding their
accuracy is given as we cannot cover or anticipate every possible application of our products and because manufacturing methods, printing stocks and other materials vary. For the
same reason our products are sold without warranty and on condition that users shall make their own tests to satisfy themselves that they will meet fully their particular
requirements. Our policy of continuous product improvement might make some of the information contained in this Product Information sheet out of date and users are requested to
ensure that they follow current recommendations.
FUJIFILM SPECIALITY INK SYSTEMS LIMITED
Pysons Road, Broadstairs
Kent CT10 2LE
United Kingdom
T: +44 (0)1843 866668
F: +44 (0)1843 872184
www.fujifilm.eu
problem can be overcome by wiping the surface with
white spirit before printing.
white spirit before printing.
Certain plastics can become brittle when printed,
possibly to the point of shattering, often only after
several weeks. It is therefore essential to check
compatibility between ink and plastic to guard against
this problem.
possibly to the point of shattering, often only after
several weeks. It is therefore essential to check
compatibility between ink and plastic to guard against
this problem.
Storage
Color+ Series BP inks should not be stored in direct
sunlight or near heat sources and should be kept away
from peroxides. In the interest of maximum shelf life
storage temperatures should be between 5
sunlight or near heat sources and should be kept away
from peroxides. In the interest of maximum shelf life
storage temperatures should be between 5
o
C and
30
o
C. When stored under these conditions the inks are
expected to have a shelf-life of 12 months from date of
manufacture.
manufacture.
Fujifilm Speciality Ink Systems Limited:
• Has certification to the International Environmental
Standard ISO 14001.
• Is committed to minimising the risk to users of our
products, and also to minimising the impact of our
activities on the environment, from formulation
through to production and supply.
activities on the environment, from formulation
through to production and supply.
• Research and development team , work to an in
house Health Safety and Environmental policy,
termed ‘Design for Health, Safety and Environment’,
with the aim of proactively developing products with
the least impact on health, safety and the
environment.
termed ‘Design for Health, Safety and Environment’,
with the aim of proactively developing products with
the least impact on health, safety and the
environment.
• Regularly review and monitor our impacts and
activities, setting objectives and targets as part of a
continual improvement process.
continual improvement process.
• Is committed to reducing waste through better use
of raw materials, energy, water, re-use and
recycling.
recycling.
Safety and Handling
Color+ Series BP inks:
• Are formulated to be free from any chemicals toxic
to health, carcinogenic, mutagenic or reprotoxic
according to Directive 67/548/EC.
according to Directive 67/548/EC.
• Are not routinely tested, but are formulated to
comply with EN71-3 1995 Toy Safety Standard.
• For optimum shelf life, all products should be stored
at moderate temperatures, between 5
o
C and 30
o
C.
Storage outside of these temperatures may lead to
deterioration in the performance of the product.
deterioration in the performance of the product.
Comprehensive information on the safety and handling
of Color+ inks is given in the appropriate Safety Data
Sheets.
of Color+ inks is given in the appropriate Safety Data
Sheets.
Environmental Information
Color+ Series BP inks:
• Do not contain ozone-depleting chemicals as
described in the Montreal Convention.
• Are formulated free from aromatic hydrocarbons.