Cisco Cisco D9824 Advanced Multi Decryption Receiver Installationsanleitung

 

200 

78-4039426-01 Rev D 

1  From the user interface of the D9824, click System Settings > Settings File > 

Import/Export. The Import/Export page is displayed. 

 

In the Device Settings File Transfer section, you can export and/or import 
device settings and transport network information. 

2  Select Export Device Settings & Transport Network Information and click 

Export to download device settings and transport network information as a file 
to the designated file folder. 

3  Select Export User Device Settings only and click Export to download user 

settings as a file to the designated file folder. 

4  In the Settings File, click Browse. The Choose File dialog opens. 

Navigate to the appropriate folder and select the file with a .bkp file extension 
and click Open. Click Import. 

5  The Configure Offline FTP Settings File Transfer section has backup and 

restore controls. 
Note: You must have access to an FTP Server (e.g. WinFTP) on a network or a 
local PC before you can setup backup/restore controls. 

6  Type the Settings Filename of the backup/restore file. You can enter up to 119 

characters. 

7  Set the FTP Server IP Address of the FTP server used to restore the 

backup/restore file. The address is up to 12 characters in length (e.g. 
171.300.100.200 and in the range from 0 to 255. 

8  Set the FTP User Name and FTP Password to access the FTP server.