Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch

Managing and Monitoring the AAA Servers

Managing the AAA Servers ▀

Cisco ASR 5000 Series AAA Interface Administration and Reference ▄

OL-23000-01

specifies the password associated with the username that is supplied to the RADIUS server for

authentication.

The following is a sample of this command‘s output for a successful response when testing a RADIUS authentication
server with an IP address of 192.168.250.150 on port 1812.

Testing a RADIUS Accounting Server

When used to test a RADIUS accounting server, the tool generates an accounting start/stop pair for a specific username.

Important:

The user name must already be configured on the RADIUS authentication server prior to executing

the test.

To execute the RADIUS authentication test tool, enter the following command:

Notes:

specifies that all configured RADIUS accounting servers be tested.

specifies the configured RADIUS authentication servers in a RADIUS

server group named

for server group functionality.

specifies the IP address of a specific RADIUS accounting server to test.

specifies the TCP port over that the system should use when communicating with the

RADIUS accounting server to test.

specifies a username that is supplied to the RADIUS server for accounting.

The following is a sample of this command‘s output for a successful response when testing a RADIUS accounting
server with an IP address of 192.168.1.102 on port 1813.