Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
RADIUS Attribute Definitions
▀ Attributes
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-23000-01
SN-Subscriber-Acct-Interim
This attribute specifies if accounting INTERIM messages are enabled for the subscriber. Note that accounting must also be
globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context (along with a
specific INTERIM interval), if accounting INTERIM messages are to be sent.
globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context (along with a
specific INTERIM interval), if accounting INTERIM messages are to be sent.
Type
26
Vendor ID
8164
VSA Type
70
Length
4
Value
Enumerated integer. Supported values are:
Normal = 0
Suppress = 1
Suppress = 1
SN-Subscriber-Acct-Mode
This attribute displays the SN Subscriber Accounting Mode.
Type
26
Vendor ID
8164
VSA Type
192
Length
4
Value
Enumerated integer. Supported values are:
flow-based-auxilliary = 0
flow-based-all = 1
flow-based-none = 2
session-based = 3
main-a10-only = 4
flow-based-all = 1
flow-based-none = 2
session-based = 3
main-a10-only = 4
SN-Subscriber-Acct-Rsp-Action
When this attribute is set to None, there is no action taken while waiting for a response for the accounting start message from
the RADIUS server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a
the RADIUS server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a