Cisco Cisco IP Phone 8841 Designanleitung
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
140
Configuring the Cisco Wireless IP Phone 8821 and 8821-EX
Wi-Fi Profile Configuration
To configure the Wi-Fi settings on the Cisco Wireless IP Phone 8821 and 8821-EX, either use the desktop charger or default
Wi-Fi profile to connect to a Cisco Unified Communications Manager, use the phone’s admin webpage interface, or use the
local user interface and keypad.
Wi-Fi profile to connect to a Cisco Unified Communications Manager, use the phone’s admin webpage interface, or use the
local user interface and keypad.
Automatic Provisioning
For automatic provisioning of the Wi-Fi Profiles, the Cisco Wireless IP Phone 8821 and 8821-EX needs to be connected to a
network either while docked with a supported USB to Ethernet dongle connected in the back of the dock or using the default
Wi-Fi settings (SSID = cisco and Security Mode = None), which has connectivity to the Cisco Unified Communications
Manager.
The native VLAN of the switch port in which the USB to Ethernet dongle is connected to must have connectivity to the CUCM
and that native VLAN must offer DHCP option 150 pointing it to the CUCM.
The Voice VLAN feature and wired 802.1x authentication are not supported, so need to ensure the switchport is configured
properly.
Use of a supported USB to Ethernet dongle is for initial provisioning purposes only and not to convert the Cisco Wireless IP
Phone 8821 or 8821-EX to a wired IP phone. Voice calls over Ethernet are not supported.
The following USB to Ethernet dongles are supported.
network either while docked with a supported USB to Ethernet dongle connected in the back of the dock or using the default
Wi-Fi settings (SSID = cisco and Security Mode = None), which has connectivity to the Cisco Unified Communications
Manager.
The native VLAN of the switch port in which the USB to Ethernet dongle is connected to must have connectivity to the CUCM
and that native VLAN must offer DHCP option 150 pointing it to the CUCM.
The Voice VLAN feature and wired 802.1x authentication are not supported, so need to ensure the switchport is configured
properly.
Use of a supported USB to Ethernet dongle is for initial provisioning purposes only and not to convert the Cisco Wireless IP
Phone 8821 or 8821-EX to a wired IP phone. Voice calls over Ethernet are not supported.
The following USB to Ethernet dongles are supported.
• Apple USB 2.0 Ethernet Adapter (
www.apple.com
)
• Belkin B2B048 USB 3.0 Gigabit Ethernet Adapter (
www.belkin.com
)
• D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter (
www.dlink.com
)
• Linksys USB3GIG USB 3.0 Gigabit Ethernet Adapter (
www.linksys.com
)
• Linksys USB300M USB 2.0 Ethernet Adapter (
www.linksys.com
)
With connectivity to a Cisco Unified Communications Manager 10.0 or later, Wi-Fi profile configuration data can be
downloaded and applied to the Cisco Wireless IP Phone 8821 and 8821-EX.
Cisco Unified Communications Manager 11.0 or later is required if wanting to download and apply a Wi-Fi profile including
EAP-TLS authentication.
Fore more information, see the Cisco Unified Communications Manager > Wireless LAN Profiles section.
downloaded and applied to the Cisco Wireless IP Phone 8821 and 8821-EX.
Cisco Unified Communications Manager 11.0 or later is required if wanting to download and apply a Wi-Fi profile including
EAP-TLS authentication.
Fore more information, see the Cisco Unified Communications Manager > Wireless LAN Profiles section.
Certificates can also be automatically installed utilizing a network connection.
For more information, see the Simplified Certificate Enrollment Protocol (SCEP) section.