Cisco Cisco IP Phone 8841 Designanleitung
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
148
• If option 150 or 66 is not configured to provide the TFTP Server’s IP address via the network’s DHCP scope, then set
Alternate TFTP to On and enter the IP address for the TFTP Server.
• Select Save to save the changes or Cancel to dismiss the changes.
• Ensure to select Erase if prompted, when configuring Alternate TFTP.
• Ensure to select Erase if prompted, when configuring Alternate TFTP.
• On call power save defaults to Enabled.
• When Enabled, the phone will utilize U-APSD when on call.
• This parameter does not alter power save when in idle as the phone will always utilize U-APSD when not on call.
• On call power save should only be set to Disabled if required for troubleshooting purposes.
• Select Save to save the changes or Cancel to dismiss the changes.
• When Enabled, the phone will utilize U-APSD when on call.
• This parameter does not alter power save when in idle as the phone will always utilize U-APSD when not on call.
• On call power save should only be set to Disabled if required for troubleshooting purposes.
• Select Save to save the changes or Cancel to dismiss the changes.
• The current network settings can be cleared by selecting Applications > Admin settings > Reset settings > Network
settings.