Cisco Cisco IP Phone 8841 Designanleitung
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
196
To boot the alternate image, perform the following procedure.
•
Turn the phone off by pressing the red button.
•
Press and hold the * key, then power on the phone.
•
Keep the * key held until the LED changes colors.
•
Once the LED changes colors, release the * key.
•
The Cisco Wireless IP Phone 8821 or 8821-EX will then boot using the alternate image for that one time only.
Phone Webpages
Cisco Wireless IP Phone 8821 and 8821-EX information can be gathered remotely by accessing the phone’s standard or admin
webpage interfaces.
The standard webpage interface (
webpage interfaces.
The standard webpage interface (
https://x.x.x.x
) contains read-only information regarding device information, network setup,
streaming statistics, device logs etc. To access the standard webpage interface, Web Access must be enabled in Cisco Unified
Communications Manager
The admin webpage interface (
Communications Manager
The admin webpage interface (
https://x.x.x.x:8443
) contains all of the info as the standard read-only page plus a few extra
configurable pages (i.e. Certificates, Date and time, and Phone restart). To access the admin webpage interface, Web Admin
must be enabled and Admin Password must be configured in Cisco Unified Communications Manager
must be enabled and Admin Password must be configured in Cisco Unified Communications Manager
Device Information
The Cisco Wireless IP Phone 8821 and 8821-EX provide device information, where network status, MAC address and version
information is displayed.
Browse to the standard web interface (
information is displayed.
Browse to the standard web interface (
https://x.x.x.x
) of the Cisco Wireless IP Phone 8821 or 8821-EX select Device
information to view this information.