Cisco Cisco Web Security Appliance S370 Betriebsanweisung
27-3
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 27 Command Line Interface
Using the Command Line Interface
When running commands, the CLI requires input from you. When the CLI is
expecting input, the prompt displays the default values enclosed in square
brackets (
expecting input, the prompt displays the default values enclosed in square
brackets (
[]
) followed by the greater than (
>
) symbol. When there is no default
value, the brackets are empty.
For example:
example.com> routeconfig
Choose a routing table:
- MANAGEMENT - Routes for Management Traffic
- DATA - Routes for Data Traffic
[]>
When there is a default setting, the setting is displayed within the
command-prompt brackets. For example:
command-prompt brackets. For example:
example.com> setgateway
Warning: setting an incorrect default gateway may cause the current
connection
to be interrupted when the changes are committed.
Enter new default gateway:
[172.xx.xx.xx]>
When a default setting is shown, typing Return is equivalent to accepting the
default:
default:
Command Syntax
When operating in the interactive mode, the CLI command syntax consists of
single commands with no white space and no arguments or parameters. For
example:
single commands with no white space and no arguments or parameters. For
example:
example.com> logconfig