Cisco Cisco Catalyst 6500 Series 7600 Series ASA Services Module
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco ASDM, Version 7.2(x)
Released: April 24, 2014
Updated: July 8, 2016
Updated: July 8, 2016
This document contains release information for Cisco ASDM Version 7.2(x) for the Cisco ASA series.
This document includes the following sections:
This document includes the following sections:
•
•
•
•
•
•
•
•
•
Important Notes
•
Upgrade impact for ASDM login when upgrading from a pre-9.2(2.4) release to 9.2(2.4) or later—If
you upgrade from a pre-9.2(2.4) release to ASA Version 9.2(2.4) or later and you use command
authorization and ASDM-defined user roles, users with Read Only access will not be able to log in
to ASDM. You must change the more command either before or after you upgrade to be at privilege
level 5; only Admin level users can make this change. Note that ASDM version 7.3(2) and later
includes the more command at level 5 for defined user roles, but preexisting configurations need to
be fixed manually.
you upgrade from a pre-9.2(2.4) release to ASA Version 9.2(2.4) or later and you use command
authorization and ASDM-defined user roles, users with Read Only access will not be able to log in
to ASDM. You must change the more command either before or after you upgrade to be at privilege
level 5; only Admin level users can make this change. Note that ASDM version 7.3(2) and later
includes the more command at level 5 for defined user roles, but preexisting configurations need to
be fixed manually.
ASDM:
a.
Choose Configuration > Device Management > Users/AAA > AAA Access > Authorization,
and click Configure Command Privileges.
and click Configure Command Privileges.
b.
Select more, and click Edit.