Cisco Cisco Virtualization Experience Client 2111 Ratgeber Für Administratoren
3-5
Cisco Virtualization Experience Client 2112/2212 ICA Administration Guide for WTOS 7.0_214
OL-215152-01
Chapter 3 Configuring Connectivity Options
Network Setup
Tip
You may enter two WINS Server addresses (primary and secondary), separated by a semicolon, comma,
or space.
or space.
Options Tab
Figure 3-5
shows the Options tab.
Figure 3-5
Network Setup—Options
Use the following guidelines for the Options tab:
•
DHCP Option IDs—Enter the supported DHCP options (each value can only be used once and must
be between 128 and 254). For information on DHCP options, refer to
be between 128 and 254). For information on DHCP options, refer to
.
•
Show WAN configuration on System Settings—Allows you to show the WAN configuration on the
System Settings submenu.
System Settings submenu.
•
Tcp Timeout—Enter the number that is multiplied by 30 seconds for the timeout value of a TCP
connection. The value must be between 1 and 255, which means the connection timeout value is
from 1 x 30 seconds to 255 x 30 seconds.
connection. The value must be between 1 and 255, which means the connection timeout value is
from 1 x 30 seconds to 255 x 30 seconds.