Cisco Cisco Unified IP Interactive Voice Response (IVR) 8.0(1) Ratgeber Für Administratoren
8-5
Cisco Unified CCX Administration Guide, Release 7.0(1)
Chapter 8 Provisioning Additional Subsystems
Provisioning Unified ICME Subsystem
Step 2
Use this web page to specify the following fields.
Field
Description
VRU Connection Port The same number configured in the VRU Peripheral Interface Manager (PIM)
on the Unified ICME system. The default value in the Unified ICME setup is
5000.
5000.
The system uses this TCP/IP socket number to receive messages from the
Unified ICME system. You can copy the VRU Connection Port value from
the VRU PIM configuration dialog box of the VRU PG machine.
Unified ICME system. You can copy the VRU Connection Port value from
the VRU PIM configuration dialog box of the VRU PG machine.
PG Hosts Allow
By default, any PG will be able to connect in the Unified ICME setup. For
security reasons, you can configure selected PGs, which you want to connect
to the Unified IP IVR system using any one of the following three options:
security reasons, you can configure selected PGs, which you want to connect
to the Unified IP IVR system using any one of the following three options:
•
Any – Click the Any radio button if you want any PG to be able to
connect to the Unified IP IVR. This radio button will be selected by
default in the Unified ICME setup.
connect to the Unified IP IVR. This radio button will be selected by
default in the Unified ICME setup.
•
None - Click the None radio button if you do not want even a single PG
to connect to the Unified IP IVR.
to connect to the Unified IP IVR.
•
Specific – Click the Specific radio button if you want to connect only
specific PGs to the Unified IP IVR. Once you select this option, you will
be able to enter the Hostname or IP address for any one or both the PGs
using the following fields:
specific PGs to the Unified IP IVR. Once you select this option, you will
be able to enter the Hostname or IP address for any one or both the PGs
using the following fields:
–
PG 1 Hostname/IP Address
–
PG 2 Hostname/IP Address
Note
When you select the Specific option, the PG1 Hostname/IP
Address is a mandatory field.
Address is a mandatory field.
Service Control
If you click Yes, the Service Control interface allows Unified ICME to
provide call-processing instructions to the Unified CCX system. It also
provides Unified ICME software with event reports indicating changes in call
state.
provide call-processing instructions to the Unified CCX system. It also
provides Unified ICME software with event reports indicating changes in call
state.
You must enable the service control interface to use the Unified ICME
subsystem.
subsystem.