Cisco Cisco TelePresence MX700 Wartungshandbuch
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
90
Cisco TelePresence MX700 and MX800
Administrator Guide
Cameras Camera [n..7] Flip
This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual
camera systems.
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: USER
Default value: Auto
Default value: Auto
Value space: Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the
image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
mounted upside down, but cannot automatically detect which way it is mounted.
Cameras Camera [n..7] Focus Mode
This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual
camera systems.
Define the camera focus mode.
Define the camera focus mode.
Requires user role: USER
Default value: Auto
Default value: Auto
Value space: Auto/Manual
Auto: The camera will auto focus once a call is connected, as well as after moving the
camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set the
right focus; then auto focus is turned off to prevent continuous focus adjustments of the
camera.
Manual: Turn the autofocus off and adjust the camera focus manually.
Manual: Turn the autofocus off and adjust the camera focus manually.
Cameras Camera [1..7] Gamma Mode
This setting enables gamma corrections, and applies only to cameras which support
gamma mode. Gamma describes the nonlinear relationship between image pixels and
monitor brightness.
Requires user role: USER
Default value: Auto
Default value: Auto
Value space: Auto/Manual
Auto: Auto is the default and the recommended setting.
Manual: In manual mode the gamma value is changed with the gamma level setting, ref.
Manual: In manual mode the gamma value is changed with the gamma level setting, ref.
Cameras Camera [n] Gamma Level.
Cameras Camera [1..7] Gamma Level
By setting the Gamma Level you can select which gamma correction table to use. This
setting may be useful in difficult lighting conditions, where changes to the brightness setting
does not provide satisfactory results. Requires the Cameras Camera [n] Gamma Mode to be
set to Manual.
Requires user role: USER
Default value: 0
Default value: 0
Value space: Integer (0..7)
Define the gamma level.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings