Cisco Cisco IP Phone 8841 Designanleitung
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
60
Dot11-Phone Mode (7920).......................... ap-cac-limit
Wired Protocol................................... 802.1P (Tag=5)
Wired Protocol................................... 802.1P (Tag=5)
In the Media settings, Unicast Video Redirect and Multicast Direct Enable should be enabled.
RF Profiles
RF Profiles can be created to specify which frequency bands, data rates, RRM settings, etc. a group of access points should use.
It is recommended to have the SSID used by the Cisco IP Phone and 8865 to be applied to 5 GHz radios only.
RF Profiles are applied to an AP group once created.
It is recommended to have the SSID used by the Cisco IP Phone and 8865 to be applied to 5 GHz radios only.
RF Profiles are applied to an AP group once created.
When creating an RF Profile, the RF Profile Name and Radio Policy must be defined.
Select 802.11a or 802.11b/g for the Radio Policy.
Select 802.11a or 802.11b/g for the Radio Policy.
On the 802.11 tab, configure the data rates as desired.