HP 1810-8G + 1810-24G J9449A#ABB#*KIT2 Benutzerhandbuch

Produktcode
J9449A#ABB#*KIT2
Seite von 8
4
HP ProCurve 1810G Switch Series
Specifications 
HP ProCurve 1810G-24 Switch (J9450A)
HP ProCurve 1810G-8 Switch (J9449A)
Ports
22 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type: 
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 
2 dual-personality ports; each port can be used as either an RJ-45 
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open 
mini-GBIC slot (for use with mini-GBIC transceivers) 
8 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type: 
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 
Physical characteristics 
Dimensions 
Weight 
17.12(d) x 44.25 (w) x 4.39 (h) cm (6.74 x 17.42 x 1.73 in.) (1U height) 
1.96 kg. (4.32 lb), Fully loaded 
11.63(d) x 19.63(w) x 4.39(h) cm (4.58 x 7.73 x 1.73 in.) (1U height) 
0.54 kg (1.19 lb.), Fully loaded 
Memory and processor
8 MB flash, 16 MB SDRAM; packet buffer size: 512 KB
8 MB flash, 16 MB SDRAM; packet buffer size: 512 KB
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, 
desktop, tabletop and undertable mounting 
Wall, ceiling, desktop, and undertable mounting
Performance 
100 Mb Latency 
1000 Mb Latency 
Throughput 
Switching capacity 
MAC address table size 
< 4.7 μs (64-byte packets) 
< 3.0 μs (64-byte packets) 
up to 35.7 million pps (64-byte packets) 
48 Gbps 
8,000 entries 
< 3.9 μs (64-byte packets) 
< 2.1 μs (64-byte packets) 
up to 11.9 million pps (64-byte packets) 
16 Gbps 
8,000 entries 
Environment 
Operating temperature 
Operating relative humidity 
Non-operating/Storage temperature 
Non-operating/Storage relative humidity 
Altitude 
Acoustic 
0ºC to 40ºC (32ºF to 104ºF) 
15% to 95% @ 40ºC (104ºF), non-condensing 
-40ºC to 70ºC (-40ºF to 158ºF) 
15% to 90% @ 65ºC (149ºF), non-condensing 
up to 3 km (10,000 ft.) 
Power: 0 dB no fan 
0ºC to 40ºC (32ºF to 104ºF) 
15% to 95% @ 40ºC (104ºF), non-condensing 
-40ºC to 70ºC (-40ºF to 158ºF) 
15% to 90% @ 65ºC (149ºF), non-condensing 
up to 3 km (10,000 ft.) 
Power: 0 dB no fan 
Electrical characteristics 
Maximum heat dissipation 
Voltage 
Current 
Maximum power rating 
Frequency 
Notes 
107.61 kJ/hr (102 BTU/hr) 
100-127 / 200-240 VAC 
0.7 / 0.4 A 
30 W 
50 / 60 Hz 
Maximum power rating and maximum heat dissipation are the worst-case 
theoretical maximum numbers provided for planning the infrastructure with 
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all 
modules populated. 
53.81 kJ/hr (51 BTU/hr) 
100-240 VAC 
0.5 A 
15 W 
50 / 60 Hz 
Maximum power rating and maximum heat dissipation are the worst-case 
theoretical maximum numbers provided for planning the infrastructure with 
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all 
modules populated. 
The exact input voltage and frequency rating are determined by the specific 
power adapter part number ordered. Please select the correct power 
adapter country option. 
Safety
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950
Emissions
FCC Rules Part 15, Subpart B Class A; EN 55022; VCCI; ICES-003 
(Canada) 
FCC Rules Part 15, Subpart B Class A; EN 55022; VCCI; ICES-003 
(Canada) 
Immunity 
EN 
ESD 
Radiated 
EFT/Burst 
Surge 
Conducted 
Power frequency magnetic field 
Voltage dips and interruptions 
Harmonics 
Flicker 
EN 55024, CISPR 24 
IEC 61000-4-2 
IEC 61000-4-3 
IEC 61000-4-4 
IEC 61000-4-5 
IEC 61000-4-6 
IEC 61000-4-8 
IEC 61000-4-11 
IEC 61000-3-2 
IEC 61000-3-3 
EN 55024, CISPR 24 
IEC 61000-4-2 
IEC 61000-4-3 
IEC 61000-4-4 
IEC 61000-4-5 
IEC 61000-4-6 
IEC 61000-4-8 
IEC 61000-4-11 
IEC 61000-3-2 
IEC 61000-3-3 
Management
HP ProCurve Manager; Web browser
HP ProCurve Manager; Web browser
Notes
Use only supported genuine ProCurve mini-GBICs with your switch.
Power: external AC power adapter and IEEE 802.3af-compatible PoE-PD, 
class 3 on Port 1