Cisco Cisco Firepower Management Center 2000

Seite von 32
 
2
FireSIGHT System Release Notes
Version 5.3.1.7
  Changed Functionality
Changed Functionality
There is no changed functionality in Version 5.3.1.7.
Features and Functionality Added in Previous Releases
For detailed information, see the FireSIGHT System User Guide, and the FireSIGHT System Installation 
Guide
.
Management of Cisco ASA with FirePOWER Services
Version 5.3.1 introduces the ability to manage Cisco ASA with FirePOWER Services (ASA FirePOWER 
devices) with the FireSIGHT Defense Center. Defense Centers running Version 5.3.1 can manage ASA 
FirePOWER modules on the following ASA devices:
ASA5512-X
ASA5515-X
ASA5525-X
ASA5545-X
ASA5555-X
ASA5585-X-SSP-10, ASA5585-X-SSP-20, ASA5585-X-SSP-40, and ASA5585-X-SSP-60
The ASA FirePOWER module must be running Version 5.3.1 to be managed by a Defense Center 
running Version 5.3.1.1. ASA FirePOWER modules can only be installed on the above platforms 
running Version 9.2.2 or later of the ASA software.
Feature Limitations of Cisco ASA with FirePOWER Services
When you use a Defense Center to manage Cisco ASA with FirePOWER Services devices, the ASA 
FirePOWER module provides the first-line system policy and passes traffic to the FireSIGHT System 
for access control, intrusion detection and prevention, discovery, and advanced malware protection.
Regardless of the licenses installed and applied, ASA FirePOWER devices do not support any of the 
following features through the FireSIGHT System:
ASA FirePOWER devices do not support the FireSIGHT System’s hardware-based features, 
including clustering, stacking, switching, routing, virtual private networks (VPN), and network 
address translation (NAT). 
Note
The ASA platform provides these features, configured using the ASA command line interface (CLI) and 
Adaptive Security Device Manager (ASDM). For more information, see the ASA FirePOWER module 
documentation.
You cannot use the Defense Center web interface to configure ASA FirePOWER interfaces.