Cisco Cisco Firepower Management Center 2000 Technisches Handbuch
Create an Access Control rule with an action of Trust.
2.
Under the Ports tab, select TCP(6) and enter port 179.
3.
Click Add to add the port to the source port.
4.
Save the access control rule.
5.
Rule 2:
Select the Access Control Policy applied to the Firepower appliance.
1.
Create an Access Control rule with an action of Trust.
2.
Under the Ports tab, select TCP(6) and enter port 179.
3.
Click Add to add the port to the destination port.
4.
Save the access control rule
5.
Verification
In order to verify that a Trust rule is operating as expected, capture packets on the Firepower
appliance. If you notice the EIGRP, OSPF or BGP traffic in the packet capture, then the traffic is
not being trusted as expected.
appliance. If you notice the EIGRP, OSPF or BGP traffic in the packet capture, then the traffic is
not being trusted as expected.