Cisco Cisco Firepower Management Center 4000 Entwickleranleitung
6-6
FireSIGHT eStreamer Integration Guide
Chapter 6 Configuring eStreamer
Managing the eStreamer Service
To configure eStreamer to use the primary management interface
Access:
Root
Step 1
Open an SSH connection to the Defense Center.
Step 2
Log into the Defense Center.
Step 3
Type
sudo su
to get root access. If necessary, type your password again when prompted.
Step 4
Type the command
manage_estreamer.pl
to start the eStreamer configuration utility.
The following menu appears:
**************** Configuration Utility **************
1 status
2 disable
3 enable
4 restart
5 send IDS events
6 don't send IDS events
7 send Packet Data
8 don't send Packet Data
9 add Client
10 delete Client
11 set EStreamer Interface
0 Exit
************************************************************
Enter choice:
Step 5
Type
11
and press Enter.
Step 6
Type
eth0
and press Enter.
Reloading EStreamer... at /usr/local/sf/lib/perl/5.10.1/SF/EStreamer.pm line 449.
**************** Configuration Utility **************
Step 7
Type
0
and press Enter to exit the script.
Step 8
Type the command
configure-network -i eth1 disable
to disable the
eth1
interface.
Managing the eStreamer Service
License:
Any
You can manage the eStreamer service from the user interface. However, you can also use the command
line to start and stop the service. The following sections describe eStreamer command line options:
line to start and stop the service. The following sections describe eStreamer command line options:
•
service.
•
describes the command line options available for the
eStreamer service and how to use them.