Cisco Denali 16.2.1

WS-C3650-12X48UR-L (LAN Base)

WS-C3650-12X48UR-S (IP Base)

WS-C3650-12X48UR-E (IP Services)

Stackable 12 100M/1G/2.5G/5G/10G Cisco UPOE™ 
downlink ports, 36 10/100/1000 Cisco UPOE™ downlink 
ports, eight 10-Gigabit uplink SFP+ ports, 1100-W power 
supply

WS-C3650-12X48UQ-L (LAN Base)

WS-C3650-12X48UQ-S (IP Base)

WS-C3650-12X48UQ-E (IP Services)

Stackable 12 100M/1G/2.5G/5G/10G Cisco UPOE™ 
downlink ports, 36 10/100/1000 Cisco UPOE™ downlink 
ports, four 10-Gigabit uplink SFP+ ports, 1100-W power 
supply

Automated Link 
Aggregation Group 
(Auto-LAG)

Provides the ability to automatically create EtherChannels on ports 
connected to a switch. 

By default, auto-LAG is disabled globally and is enabled on all port 
interfaces. Auto-LAG applies to a switch only when it is enabled 
globally.

See 

.

(LAN Base, IP Base and IP Services) 

Cisco TrustSec (CTS) 
Security Group Access 
Control (SGACL) HA

Support for high availability on switches that support the Cisco 
StackWise technology. Cisco StackWise provides stateful redundancy 
and allows the switch stack to enforce and process access control entries. 

This feature does not require any Cisco TrustSec-specific user 
configuration. 

See 

(LAN Base, IP Base, and IP Services)

Gateway Load Balancing 
Protocol (GLBP) for IPV4

Protects data traffic from a failed router or circuit, like Hot Standby 
Router Protocol (HSRP) and Virtual Router Redundancy Protocol 
(VRRP), while allowing packet load sharing between a group of 
redundant routers.

See 

(IP Base and IP Services) 

Link Aggregation Control 
Protocol (LACP) Fast Rate

Support for the new lacp rate command, to set the rate at which LACP 
packets are sent to LACP-supported interfaces. You can change the 
timeout rate from 30 seconds (default rate) to 1 second (fast rate).

See the 

 command.

(LAN Base, IP Base, and IP Services) 

Named VLAN

Option to specify a VLAN name for access and voice VLAN.

See the 

 command.

(LAN Base, IP Base, and IP Services)