Cisco Cisco Content Security Management Appliance M160 Betriebsanweisung
11-89
Cisco IronPort AsyncOS 7.2.0 for Security Management User Guide
OL-21768-01
Chapter 11 Common Administrative Tasks
Note
When gathering data for reports, the Security Management appliance applies the
time stamp from the information that was set when you configured the time
settings on the Security Management appliance. For information on how the
Security Management appliance gathers information, see
time stamp from the information that was set when you configured the time
settings on the Security Management appliance. For information on how the
Security Management appliance gathers information, see
.
Editing Time Settings (GUI)
To edit the time settings for your Cisco IronPort appliance, click the Edit Settings
button on the Management Appliance > System Administration > Time Settings
page. The Edit Time Settings page appears.
button on the Management Appliance > System Administration > Time Settings
page. The Edit Time Settings page appears.
Figure 11-31
Edit Time Settings Page
Editing the Network Time Protocol (NTP) Configuration (Time Keeping Method)
To use an NTP server to synchronize the system clock with other computers and
edit the NTP server settings:
edit the NTP server settings:
Step 1
Click Edit Settings on the Management Appliance > System Administration >
Time Settings page. The Edit Time Settings page appears.
Time Settings page. The Edit Time Settings page appears.
Step 2
In the Time Keeping Method section, select Use Network Time Protocol.
Step 3
Enter an NTP server address and click Add Row. You can add multiple NTP
servers.
servers.