Cisco Cisco IOS Software Release 12.0(22)S
1
Cisco IOS Release 12.0(22)S
MPLS Traffic Engineering (TE)—Link and Node
Protection, with RSVP Hellos Support
Protection, with RSVP Hellos Support
Feature History
This document describes the Fast ReRoute (FRR) enhancements, including Node Protection, in
Cisco IOS Release 12.0(22)S. Node Protection can be viewed as a superset of (that is, an
enhancement to) FRR Link Protection. The document includes the following sections:
Cisco IOS Release 12.0(22)S. Node Protection can be viewed as a superset of (that is, an
enhancement to) FRR Link Protection. The document includes the following sections:
•
•
•
•
•
•
•
•
•
Note
If you plan to use or already use MPLS Traffic Engineering Fast ReRoute Link Protection before
Release 12.0(22)S, contact Cisco TAC Support for important deployment and upgrade information.
Release 12.0(22)S, contact Cisco TAC Support for important deployment and upgrade information.
Feature Overview
Fast ReRoute (FRR) is a mechanism for protecting MPLS Traffic Engineering (TE) label-switched paths
(LSPs) from link and node failures by locally repairing the LSPs at the point of failure, allowing data to
continue to flow on them while their headend routers attempt to establish new end-to-end LSPs to replace
them. FRR locally repairs the protected LSPs by rerouting them over backup tunnels that bypass failed
links or nodes.
(LSPs) from link and node failures by locally repairing the LSPs at the point of failure, allowing data to
continue to flow on them while their headend routers attempt to establish new end-to-end LSPs to replace
them. FRR locally repairs the protected LSPs by rerouting them over backup tunnels that bypass failed
links or nodes.
Release
Modification
12.0(10)ST
Fast ReRoute Link Protection feature was introduced.
12.0(16)ST
Link Protection for Cisco Series 7200 and 7500 platforms was added.
12.0(22)S
Fast ReRoute
enhancements were added.