Cisco Cisco IOS Software Release 12.4(11)T
1
User Defined Source Port Ranges for PAT
The User Defined Source Port Ranges for PAT feature enables the specification of source port ranges for
Port Address Translation (PAT) for Session Initiation Protocol (SIP), H.323, and Skinny Real-Time
Transport Protocol (RTP) and RTP Control Protocol (RTCP).
Port Address Translation (PAT) for Session Initiation Protocol (SIP), H.323, and Skinny Real-Time
Transport Protocol (RTP) and RTP Control Protocol (RTCP).
Configuration Information
Configuration information is included in the “Using Application level Gateways with NAT” module in
the
the
, Release 12.4T, at the following URL:
Command Reference Information
Command reference information is included in the “
chapter of the Cisco IOS IP
Addressing Services Command Reference at the following URL:
New or Modified Commands
The following commands are new or modified for this feature:
•
ip nat port-map
•
ip nat service
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Command List,
Release 12.4T, at the following URL:
Release 12.4T, at the following URL:
•
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS
Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands,
Release 12.4T, document at the following URL:
Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands,
Release 12.4T, document at the following URL:
•